UCM-03DS
Description
UCM-03DS offers:
- Built-in laser system for mica scanning and commutator diameter measuring
- Fully automatic process after armature loading
- Efficient dust collection system ensures a dust-free process
- Short readjustment time
Features
- 3 Scanning Modes – Full scan with Mica Skew measuring, Full Scan without mica skew measuring, and Short Scan
- 3 Modes of operation of the Auto Cycle – Continuous, Step by Step, and Demo mode
- Measuring and Control of the Mica Skew (optional)
- Automatic compensation of the mica skew while undercutting (optional)
- Automatic identification of the machine OFFSET parameter
- Preemptive loading control for improper armature types
- Automatic initial positioning of the armature
- Indexing mechanism with Laser type photo-electric sensor for scanning the mica slots
- Laser commutator diameter measuring unit
- 3 Servo-drive systems providing accurate positioning, optimal dynamic parameters and rapid movement while undercutting
- Mobile cutter-tracking dust collector provides a dust-free process
- Productivity – up to 120 pcs/hour
- “S”-Curve type of dynamic positioning process provides fast, smooth and noise-reduced movement
- User-friendly interface via touch screen LCD display
- PLC-controlled function with pre-defined model parameters for up to 99 armature types
- Fast readjustment (less than 2 min) for various armature sizes and number of commutator bars
- Acumulation of stats database for past undercut armatures for up to 20 years
- Self-diagnostic troubleshooting built-in software
- Multi-language capabilities available upon request
Specifications
| Commutator diameter, mm | 17-80 |
| Commutator length, mm | 22-55 |
| Number of commutator bars | 10-128 |
| Armature shaft length, mm | 90-550 |
| Armature shaft end diameter, mm | 6.35-22 |
| Armature body diameter | 40-110 |
| Positioning accuracy, mm | 0.01 |
| Skew compensation accuracy, mm | 0.01 |
| Depth of undercutting, mm | 0.2 – 1.2 |
| Maximum number armature types | 99 |
| Productivity (depends on number and lenght of bars) pcs/hour | up to 120 |
| Type of dynamic positioning processes | “S”-Curve |
| Electrical power supply, V, Hz, kW (other voltages available) | 3x230 VAC, 60Hz, 6.8 kW |
| Air pressure supply, Bar | 6 |
| Air consumption, Nl/min | 25 |