CFI-05S
Description
The CFI-05S Clips-Forming and Inserting Machine is a fully automated bench type machine designed for inserting clips into the armatures hairpins leads. This operation prepares the armatures with riser less commutator for the subsequent operation: Welding with the Automatic Commutator Spot-Welding Machine SWM-500MS.
The CFI-05S cycle time is 1.2 seconds per slot and, with this productivity the machine is able to feed with armatures two Spot-Welding machines simultaneously. The machine is fully automatic and the only manual operation is the armature loading/unloading. The machine is suitable for any type riserless commutator, regardless of the size of the armature or the number of slots.
CFI-05S offers:
- Fully automated operation after armature loading
- Replacement of one of the most time consuming manual operations in the armature production process
- Computerized control of the entire process; warning is issued if the inserting process is not successful
- Readjustment time is only 10 minutes
- User-friendly interface
- High safety level ensured by completely enclosed feeding area
Features
- Automatic initial positioning of the armature
- Precise positioning of the bars realized by original touch-type mechanism
- LCD display of all technical and geometrical parameters and current status of the feeding process
- Renders self-diagnostic troubleshooting system
Specifications
| Commutator diameter, mm | 28 to 60 |
| Number of commutator bars | 10 to 99 |
| Armature’s shaft length, mm | 180 to 500 |
| Electrical power,Volt, Hz | 220, 60 (Other voltages available on request) |
| Air pressure supply, bar | 6 |
| Productivity depends on the # of bars, pcs/hour | up to 150 |